Concrete Cutting
We cut reinforced concrete of any thickness with blades, wire and wall saws — no percussion, no damage to the structure that stays standing.
View service
Concrete cutting & drilling
We cut concrete where
We cut concrete where
no one else will
Tilt Up walls with no thickness limit, beams and columns with diamond wire, cores from 1" to 24". In Tijuana since 2011.
Controlled demolition
Demolition by plan,
Demolition by plan,
not by force
We section the structure with diamond tooling and lower each piece by crane — right beside what must stay standing.
Tilt Up walls
We open your plant
We open your plant
without stopping production
Doors, docks and windows in Tilt Up panels, cut plumb and with dust control. The line keeps running.
Floor sawing & drilling
Straight line,
Straight line,
exact depth
Trenches, joints, sumps and pavement. Guided self-propelled saws, with no wander and no spalling.
Own fleet · Hilti
Fifteen years
Fifteen years
of work in Baja
Our own equipment, trained crews and the right machine for every cut. Tijuana, Rosarito, Tecate, Ensenada and Mexicali.
01 / 05
15+Years of experience
24"Maximum core diameter
6Cities served
100%Projects delivered
Who we are
Cutting concrete in Baja California since 2011
GPC Construcciones is a leading company in Tijuana, Baja California, with more than 15 years of experience in the construction sector. We specialise in concrete cutting and controlled demolition, meeting our clients' needs on every project with precision and punctuality.
Since 2011 we have offered concrete cutting and drilling services. We work Tilt Up walls with no thickness limit and cores from 1" to 24". We also operate diamond wire equipment for cutting beams and columns, along with floor sawing, concrete drilling and wall cutting.
Our mission
To maintain our leadership in the construction sector by providing our clients with comprehensive, project-specific solutions.
Our vision
To establish ourselves as trusted strategic allies for our clients, delivering the highest quality integral solutions and exceeding their expectations on every project.
15+years in Baja California
Services
GPC quality and commitment
We cut, drill and demolish concrete with the equipment each job requires. These are the services most often requested.
Concrete Core Drilling
Diamond cores from 1" to 24" in slabs, walls and foundations, at any angle and to the depth the project needs.
View service
Diamond Wire Sawing
When thickness exceeds any blade, diamond wire cuts the whole section in a single controlled operation.
View service
Tilt Up Wall Cutting
Door, dock and window openings in Tilt Up walls, cut plumb, with the plant still working.
View service
Floor Sawing
Self-propelled floor saws for slabs, pavement, service trenches and expansion joints.
View service
Controlled Demolition
Partial or total demolition with pre-cutting and a planned lift, instead of hammering and seeing what falls.
View service
Floor Polishing
We restore shine, flatness and service life with progressive mechanical polishing and sealing.
View service
Epoxy Anchoring
Dowels, bolts and base plates set with structural resin, with a clean hole and the correct embedment.
View service
Why GPC
Why hire GPC Construcciones
No thickness limit
Tilt Up walls of any thickness and massive sections with diamond wire. Where a blade cannot reach, the wire does.
No vibration, no damage
Diamond cuts by abrasion. The structure that remains takes no impact, no vibration and no microcracking.
Your plant keeps running
Dust control, water capture and phased work so production never stops.
Own, trained crews
Hilti and diamond wire equipment, with crews trained for the full execution of each project.
On-time response
We respond with precision and punctuality. Clear quotes and a schedule that holds.
Coverage across Baja
Tijuana, Playas de Rosarito, Tecate, Ensenada, Mexicali and the Otay border area.
How we work
How we run a cutting job
A structural cut is not improvised. This is the sequence we follow on every job.
Site visit and survey
We go to the site, measure the element and review access, services and working conditions.
Technical proposal
We define the method — blade, wire, wall saw or core drilling — the break-up, the lift and the schedule, at a fixed price.
Layout and protection
We mark the cut, check it against the reinforcement and protect the area: cordoning, water capture and dust control.
Execution
We cut and remove piece by piece, in the order the plan sets. No improvising as we go.
Clean handover
Debris and slurry removed, area cleaned and the site handed over ready for the next stage.
Projects
Real work, not stock photography
Every image on this site comes from work executed by GPC Construcciones in Baja California.
Coverage
Where we work
Based in Tijuana and operating across Baja California, including the Otay border strip.
Tijuana
Tijuana has been our base of operations since 2011. We serve the industrial parks of Otay and El Florido, the commerci…
Playas de Rosarito
Rosarito concentrates resort development and beachfront vertical housing, where concrete works in a saline environment…
Tecate
Tecate concentrates industrial and agri-industrial plants. We handle building extensions, dock openings, machine bases…
Ensenada
In Ensenada the heavy work is at the port and in agri-industry. Diamond wire lets us cut underwater and section port s…
Mexicali
Mexicali is a heavy manufacturing hub, with long-span buildings and high-strength slabs. It is territory for high-powe…
Otay and the San Diego Border
The Otay strip concentrates maquiladora and cross-border logistics: plants that run three shifts and cannot stop. Ther…
FAQ
What we are asked most
There is no practical limit. A wall saw handles usual thicknesses from one or both faces, and when the section exceeds the blade we bring in diamond wire, which cuts beams, columns and foundation blocks of any size.
From 1 inch up to 24 inches, in floors, walls, soffits and at an angle, with diamond bits on anchored or vacuum bases.
No. Diamond cutting works by abrasion, not percussion, so it transmits no vibration and creates no microcracking in the adjacent concrete. That is why it is used when working next to structure in service.
Yes, that is the norm. The work area is isolated, water capture and dust control are set up, and noisy operations are scheduled in windows agreed with the plant manager, including night shifts and weekends.
For clearly defined work, the same day. When a site visit is needed — which is advisable for structural cutting and demolition — we schedule it within the next 24 to 48 working hours.
Access for the equipment, a 220 V power supply or authorisation for a generator, and a water supply for cooling. If the site has no services we bring a generator and a water tank; it is stated in the quote.
Do you have concrete to cut?
Tell us what needs opening, drilling or demolishing. We reply with method, schedule and a clear price.