Concrete Cutting
We cut reinforced concrete of any thickness with blades, wire and wall saws — no percussion, no damage to the structure that stays standing.
View service
LP15 Wall Sawing: Rail-Mounted Saw
Rail-mounted wall saw: straight, plumb cuts with the operator clear of the cut line.
The LP15 wall saw is the equipment we use to open straight bays in walls and slabs. It runs on a rail anchored to the element, so the blade always advances on the same line, without drift and without depending on the operator's hand. Control is remote: the technician works clear of the blade path.
It is the right tool when the opening must be square to receive a frame, a shutter or a precast element. It also solves high-level cutting from scaffold or lift, and slab cutting from the top or the underside.
What this service includes
Rail-guided cutting
The opening comes out straight and plumb, with no waviness or drift.
Remote operation
The operator runs the machine from a distance, clear of the blade line and the drop zone.
Elevated cutting
Mounted on scaffold, lift or structure to work above floor level.
Walls and slabs
The same machine cuts vertically, horizontally and overhead depending on rail setup.
Typical applications
- Door and window openings in concrete walls
- Dock openings in industrial buildings
- Stair and elevator shafts through slabs
- High-level cutting on façades and parapets
- Overhead cutting in suspended floors
- Trimming walls and parapets to level
- Precision cuts for precast elements
- Openings for ducts and process equipment
Questions about lp15 wall sawing
It depends on the blade fitted; on walls of usual thickness we cut from one face and, if needed, finish from the opposite side until the cuts meet.
Yes, the rail is fixed with anchors. The holes fall inside the area being removed, or are patched on completion.
Yes. It is wet cutting, so water capture and protective barriers are set up; the area is left clean.
You may also need
Related services
Diamond Wire Sawing
When thickness exceeds any blade, diamond wire cuts the whole section in a single controlled operation.
View service
Tilt Up Wall Cutting
Door, dock and window openings in Tilt Up walls, cut plumb, with the plant still working.
View service
Do you have concrete to cut?
Tell us what needs opening, drilling or demolishing. We reply with method, schedule and a clear price.